Face Masks

Face Masks & Respirators
Manufacturer & Supplier


Linkhub Supply Chain Management Co., Ltd. is a specialized face masks & respirators manufacturer and supplier in China.

Our main products are face masks and repirators, such as Surgical face mask, 3 ply disposable mask, Medical mask, KN95 mask, N95 mask and custom mask, etc.

As a professional supplier of PPE masks and respirators, Linkhub is committed to providing its customers with high quality, market-compliant products. All masks meet China's export requirements and have corresponding inspection reports for different use scenarios, as well as meet the import requirements of the customer's country and have the corresponding certificates for customs clearance.

Write to us today: info@belinkhub.com or Call us: +86 +86 189-2460-0760


3 Ply Disposable Mask

Surgical Mask

KN95 Respirator

N95 Respirator

3 ply disposable face masks


High-quality personal protective gear 3 ply disposable masks. For use by routine protective use by the civilian.

Our three-layer disposable masks are made of non-woven fabric with a 95% or 99% bacterial filtration efficiency melt-blown fabric in the middle. The clip of the nose is designed to fit the face, and the mask is available in both ear-loop and tie styles.

If you have any question about this personal protective mask, feel free to contact our team any time.


  • Personal protective equipment
  • Sterilized and non-sterilized masks
  • Meets Chinese export standard requirements
  • European CE EN149 certifications
  • USA FDA certifications and EUA white-list

Read more Get a free quote

This surgical face mask BFE is over 95% or 99%, specified in EN 14683:2019+AC:2019 Standard. Use for healthcare procedures where heavy to moderate amounts of fluid, spray, and/or aerosols are produced.

But Type I masks are not intended for use by healthcare professionals in an operating room or in other medical settings with similar requirements.


  • Medical and Surgical masks
  • Sterilized and non-sterilized masks
  • Meets Chinese export standard requirements
  • European CE EN14683 certifications
  • USA FDA certifications and EUA white-list

Read more Get a free quote

Surgical face masks


Medical-surgical 3 ply (three layers) face masks, meet EN14683 Type I II IIR standards. For use by healthcare professionals in an operating room or in other medical settings with similar requirements.

N95 Respirator


N95 tight-fitting mask, most critical supplies for healthcare and other medical workers for anti-COVID-19.

High-quality N95 respiratory protective masks, NIOSH approved. As a critical personal protective equipment, the N95 mask designed for efficient filtration of airborne particles, and the PFE (Particle Filtration Efficiency) is over or equal to 95%.

Write us to get more details based-on your country's requirement or get the latest inventory and price info.


  • PFE (Particle Filtration Efficiency) ≥ 95%
  • FDA NIOSH approved
  • European CE EN standard 149:2001
  • Complies with USA import requirements

Read more Get a free quote

KN95 respiratory protective mask, 4 or 5 layers available. Follow GB 2626-2006 standards with authority test reports. With CE EN 149:2001+A1:2009 certificate and FDA EUA whitelist. Alternative to FFP2 and N95 masks.


  • GB 2626-2006 standards
  • Alternative to FFP2 and N95 level.
  • CE EN 149:2001+A1:2009
  • FDA whitelist and EUA listing
  • Meet Europe, USA and global standards.

Read more Get a free quote
kn95-respirator-mask

KN95 Respirator


High-quality respiratory protection mask, KN95 respirator. PFE (Particle Filtration Efficiency) ≥ 95%, alternative to FFP2 and N95 level.

parallax background

Over 100+ clients choose us, check out what they say


  • Thanks for your kindness supporting! In this special period when the world is fighting against this virus, the protective products you made and delivery really mean a lot to us.
    Jennifer Lee

Face Masks & Respirators Types

The facemask is often called a surgical mask and usually refers to a 3-layer disposable surgical mask that is used by health professionals when performing related treatments or healthcare procedures. It is designed to prevent infection of patients and treaters by capturing the bacteria emanating from droplets and aerosols scattered from the mouth and nose of the wearer.

Respirator protective mask focuses more on preventing exposure to airborne particles. It is designed to prevent exposure to biological aerosols including viruses and bacteria for the wearer in healthcare.

Medical masks are generally divided into two categories: Respirator protective masks (like N95, KN95, FFP2, etc.) and Surgical masks (3 ply disposable surgical/medical mask).


The Component Materials of Surgical Face Mask

The commonly used material for the 3 ply surgical mask are:

  • Inner layer (in contact with face mask);
  • Middle layer (Most important components that ensures the filtration);
  • Outer layer
  • Ear-loop or tie-on
  • Nose clip

Five Basic Protective Criteria of Mask

The protective indicators of medical masks generally include the following basic criteria:

  • BFE (Bacterial Filtration Efficiency): Percentage of particles filtered out at a pore size of 1.0 - 5.0 microns (µ)
  • PFE (Sub-micron Particulate Filtration Efficiency): Percentage of particles filtered out at a pore size of
    0.1 - 1.0 microns (µ)
  • Fluid Resistance (Synthetic Blood Resistance): Mask resistance to penetration by synthetic blood under pressure (mmHg). Higher resistance = higher protection
  • DELTA P (Differential Pressure): Pressure drop across mask, or resistance to air flow in mmH2O/cm2; Greater resistance = better protection but less breathability
  • FLAME SPREAD: Measures the flame spread of the mask material

The Main Difference between Face mask and Respirator

Respirator protective masks and surgical masks have different emphasis on the above evaluation indicators.

Respiratory protective masks focus more on the filtration of Sub-micron particles (high particle filtration efficiency), while surgical masks focus more on liquids such as blood Splash protection (high synthetic blood penetration resistance);

However, respiratory protective masks are often prone to shortages during major outbreaks, and surgical masks can also be used as the most basic respiratory protection if necessary.


Face Mask Export Requirements

Face Mask Exporting Requirement?

Vivamus in diam turpis. In condimentum maximus tristique. Maecenas non laoreet odio. Fusce lobortis porttitor purus, vel vestibulum libero pharetra vel. Pellentesque lorem augue, fermentum nec nibh et, fringilla sollicitudin orci.

Integer pharetra magna non ante blandit lobortis. Sed mollis consequat eleifend. Aliquam consectetur orci eget dictum tristique. Aenean et sodales est, ut vestibulum lorem.


Europe Face Mask & Respirators Standards

Medical-Surgical mask Standards and Regulations

Europe EN14683BFE
(Bacterial Filtration Efficiency)
PFE
(Particulate Filtration Efficiency)
Breathing Resistance
(Pa/cm2)
Splash Resistance
(mmHg)
Microbial Cleanliness
(cfu/g)
Fluid ResistanceDELTA P
(Pa/cm2)
Type I≥ 95%Not required< 29.4Not required≤ 30NA< 40
Type II≥ 98%Not required< 29.4Not required≤ 30NA< 40
Type IIR≥ 98%Not required< 49.0> 120 (≥ 16.0kPa)≤ 30NA< 60
*Type I medical face masks should only be used for patients and other persons to reduce the risk of spread of infections particularly in epidemc or pandemic situations. Type I masks are not intended for use by healthcare professionals in an operating room or in other medical setting with similar requirements.

Respirators (PPE) Standards and Regulations

EN 149:2001+A1:2009PFE
Filter penetration limit (at 95 L/min air flow)
Inward leakageAlternative
FFP1Filters at least 80% of airborne particles<22%/
FFP2Filters at least 94% of airborne particles<8%KN95/N95
FFP3Filters at least 99% of airborne particles<2%KN100/N99/N100
*FPP2 mask alternative to KN95 and N95 respirators.
The USA Face Mask & Respirators Standards

Medical-Surgical mask Standards and Regulations

ASTM F2100-11 LevelsBarrier ProtectionBFEPFE
(0.1 micron)
Fluid ResistanceDELTA PFlame Spread
Level 1Low≥ 95%≥ 95%80 mm Hg< 4.0 mm H2O/cm2Class 1
Level 2Moderate≥ 98%≥ 98%120 mm Hg< 5.0 mm H2O/cm2Class 1
Level 3Maximum≥ 98%≥ 98%160 mm Hg< 5.0 mm H2O/cm2Class 1

Respirators (PPE) Standards and Regulations

NIOSH StandardsPFE
(at least 0.3 microns)
Alternative
N95≥ 95%KN95/FFP2
N99≥ 99%KN100/FFP3
N100≥ 99.97%KN100/FFP3
*N95 mask alternative to KN95 and FFP2 respirators.

As a professional PPE supplier & manufacturer, for any questions regarding face masks & Respirators or personal protective equipment, feel free to contact us and our teams will be in touch with you shortly.

Fill out the form below, contact us today!

Get a instant quote now!


Just simply write to us, our teams will be back to you as soon as possible.